35e170b40cA failed fetch left the cache mtime untouched, so with no network every redraw — and a redraw happens on every keystroke — tried curl again and could wait --max-time 10 for it. Cutting the TTL from an hour to five minutes made that start 55 minutes sooner, so it is worth fixing now. The marker is a separate file rather than a touch of the cached response: a cold /tmp has no response to touch, and that is exactly the case with no stale data to fall back on, where the timeout is paid in full with nothing to show for it. It goes down before the request and is cleared when that lands, not written afterwards. A fetch is in flight for as long as curl takes to give up, and this cache dir is shared by every session, so redraws starting inside that window are real rather than hypothetical: they now serve stale data instead of each launching their own doomed request. Every attempt writes it, so a repeated failure restarts the backoff, and only an attempt does, so the redraws it suppresses cannot keep re-stamping it and it always lapses. Missing credentials stays outside the backoff — it costs no timeout, and the redraw after a login should show the bars rather than wait out a retry window it had no part in earning. Co-Authored-By: Claude Opus 5 (1M context) <noreply@anthropic.com>
689 lines
29 KiB
Shell
Executable file
689 lines
29 KiB
Shell
Executable file
#!/bin/bash
|
||
# Claude Code Status Line
|
||
# Based on https://github.com/daniel3303/ClaudeCodeStatusLine
|
||
# Enhanced: git branch/ahead-behind, token bar, caching, improved visuals
|
||
|
||
set -f # disable globbing
|
||
|
||
# ===== Config =====
|
||
SHOW_GIT=true # git branch, dirty status, ahead/behind
|
||
SHOW_TOKENS=true # token usage bar
|
||
SHOW_THINKING=true # extended thinking indicator
|
||
SHOW_RATE_LIMITS=true # 5h / 7d rate limit bars
|
||
SHOW_MODEL_LIMIT=true # per-model weekly limit bar (e.g. Fable), when the API reports one
|
||
WRAP_NARROW=true # wrap onto a second line rather than dropping segments or being clipped
|
||
WRAP_MIN_WIDTH=100 # below this, keep wide-tier line-one content (it can wrap)
|
||
BRANCH_MAX_LEN=28 # truncate branch names longer than this
|
||
CWD_MAX_LEN=20 # truncate the cwd basename longer than this
|
||
GIT_CACHE_SECS=10 # seconds to cache git status (git diff is slow on large repos)
|
||
USAGE_CACHE_SECS=300 # seconds to cache the usage API response (the 5h/7d bars)
|
||
USAGE_RETRY_SECS=60 # seconds to wait before retrying a failed usage API fetch
|
||
TOKEN_BAR_WIDTH=8 # width of token progress bar
|
||
|
||
# Where the git and usage-API caches live. Overridable via the environment so a
|
||
# test run can render into its own directory: ~/.claude/statusline.sh is a
|
||
# symlink to this script, so a fixture written to the live cache is picked up by
|
||
# the next redraw and shown as real usage until USAGE_CACHE_SECS is up.
|
||
CACHE_DIR="${STATUSLINE_CACHE_DIR:-/tmp/claude}"
|
||
|
||
# Terminal width detection.
|
||
# Claude Code exports COLUMNS for this subprocess. There is no controlling
|
||
# terminal, so the stty fallback fails; when both fail we default to 80
|
||
# (safe/compact) rather than wide.
|
||
#
|
||
# The `padding` setting indents the status line on both sides, and Claude Code
|
||
# applies it on top of COLUMNS rather than deducting it first — measured: with
|
||
# COLUMNS=121 and padding 2, a 121-column line is clipped with an ellipsis. So
|
||
# deduct it here, plus a column of margin.
|
||
#
|
||
# To override detection entirely, set TERM_WIDTH in settings.json:
|
||
# "command": "TERM_WIDTH=160 ~/.claude/statusline.sh"
|
||
# Read both settings this script needs in one jq pass.
|
||
# Only the user-level file: Claude Code also merges project .claude/settings.json,
|
||
# .claude/settings.local.json and managed policy, so a statusLine.padding set at
|
||
# project level would be applied by the renderer but missed here.
|
||
sl_padding=0
|
||
sl_thinking=false
|
||
if [ -f "$HOME/.claude/settings.json" ]; then
|
||
{ IFS= read -r sl_padding; IFS= read -r sl_thinking; } <<EOF
|
||
$(jq -r '[(.statusLine.padding // 0), (.alwaysThinkingEnabled // false)] | .[] | tostring' "$HOME/.claude/settings.json" 2>/dev/null)
|
||
EOF
|
||
[ "${sl_padding:-0}" -ge 0 ] 2>/dev/null || sl_padding=0
|
||
fi
|
||
|
||
if [ "${TERM_WIDTH:-0}" -le 0 ] 2>/dev/null; then
|
||
if [ "${COLUMNS:-0}" -gt 0 ] 2>/dev/null; then
|
||
TERM_WIDTH=$COLUMNS
|
||
else
|
||
_w=$(stty size </dev/tty 2>/dev/null | awk '{print $2}')
|
||
[ "${_w:-0}" -gt 0 ] 2>/dev/null && TERM_WIDTH=$_w || TERM_WIDTH=80
|
||
unset _w
|
||
fi
|
||
fi
|
||
|
||
# Usable width: minus padding on both sides, minus a column of margin.
|
||
USABLE_WIDTH=$(( TERM_WIDTH - 2 * sl_padding - 1 ))
|
||
[ "$USABLE_WIDTH" -lt 20 ] && USABLE_WIDTH=20
|
||
|
||
# ${#str} counts characters only under a UTF-8 locale; under LC_ALL=C it counts
|
||
# bytes, which would mis-measure the box/block glyphs and break line wrapping.
|
||
case "${LC_ALL:-${LC_CTYPE:-${LANG:-}}}" in
|
||
*UTF-8*|*utf8*|*UTF8*) ;;
|
||
*)
|
||
# C.UTF-8 on glibc, en_US.UTF-8 on macOS (which has no C.UTF-8).
|
||
# Picking one that does not exist makes bash warn on every render and
|
||
# silently fall back to byte counting, so verify before committing.
|
||
for _loc in C.UTF-8 en_US.UTF-8; do
|
||
if LC_ALL="$_loc" locale charmap 2>/dev/null | grep -qi utf; then
|
||
export LC_ALL="$_loc"; break
|
||
fi
|
||
done
|
||
unset _loc
|
||
;;
|
||
esac
|
||
|
||
input=$(cat)
|
||
[ -z "$input" ] && printf "Claude" && exit 0
|
||
|
||
mkdir -p "$CACHE_DIR"
|
||
|
||
# ===== Colors =====
|
||
# Palette indices rather than RGB, so these resolve through the terminal's own
|
||
# palette and follow the ghostty tangere-light/tangere-dark swap for free. No
|
||
# appearance detection, so no cost per statusline render.
|
||
#
|
||
# The previous values were One Dark RGB: fine on dark (4.3-10.8:1) but 1.35-3.4:1
|
||
# on a light background, with 'white' effectively invisible. These clear WCAG AA
|
||
# in both modes (5.8-14.3:1 on dark, 6.3-20.6:1 on light).
|
||
blue='\033[38;5;4m'
|
||
orange='\033[38;5;3m'
|
||
amber='\033[38;5;11m'
|
||
green='\033[38;5;2m'
|
||
cyan='\033[38;5;14m'
|
||
red='\033[38;5;1m'
|
||
yellow='\033[38;5;3m'
|
||
white='\033[39m'
|
||
magenta='\033[38;5;5m'
|
||
dim='\033[2m'
|
||
reset='\033[0m'
|
||
|
||
sep=" ${dim}│${reset} "
|
||
|
||
# ===== Helpers =====
|
||
|
||
format_tokens() {
|
||
local num=$1
|
||
if [ "$num" -ge 1000000 ]; then
|
||
awk "BEGIN {printf \"%.1fm\", $num / 1000000}"
|
||
elif [ "$num" -ge 1000 ]; then
|
||
awk "BEGIN {printf \"%.0fk\", $num / 1000}"
|
||
else
|
||
printf "%d" "$num"
|
||
fi
|
||
}
|
||
|
||
# Display width of a string, ignoring ANSI colour escapes. Every glyph the
|
||
# statusline uses is single-width, so a character count is the display width.
|
||
#
|
||
# The colour vars hold the escapes as literal backslash-033 text (they are
|
||
# single-quoted, and printf %b only interprets them when the line is finally
|
||
# emitted), so strip that literal form as well as a real ESC byte.
|
||
vis_len() {
|
||
local plain
|
||
plain=$(printf '%s' "$1" | sed -e 's/\\033\[[0-9;]*m//g' -e $'s/\033\[[0-9;]*m//g' -e 's/\\\\/\\/g')
|
||
printf '%d' "${#plain}"
|
||
}
|
||
|
||
# printf %b interprets backslash escapes -- that is how the colour variables
|
||
# above are applied. Data from the API or the filesystem must NOT be
|
||
# interpreted: a directory or model name containing a literal \n would split
|
||
# the line, breaking both the width measurement and the two-line guarantee.
|
||
# Double the backslashes so %b renders them literally.
|
||
esc_data() {
|
||
local v="$1"
|
||
# Real control characters (jq decodes \n in the JSON payload into an actual
|
||
# newline) would split the line regardless of escaping, so drop them first.
|
||
v="${v//$'\n'/ }"; v="${v//$'\r'/ }"; v="${v//$'\t'/ }"; v="${v//$'\033'/}"
|
||
printf '%s' "${v//\\/\\\\}"
|
||
}
|
||
|
||
truncate_str() {
|
||
local str="$1" max="$2"
|
||
[ "${#str}" -gt "$max" ] \
|
||
&& printf "%s…" "${str:0:$((max-1))}" \
|
||
|| printf "%s" "$str"
|
||
}
|
||
|
||
# Colored progress bar using block chars
|
||
build_bar() {
|
||
local pct=$1 width=$2
|
||
[ "$pct" -lt 0 ] 2>/dev/null && pct=0
|
||
[ "$pct" -gt 100 ] 2>/dev/null && pct=100
|
||
local filled=$(( pct * width / 100 ))
|
||
local empty=$(( width - filled ))
|
||
local bar_color
|
||
if [ "$pct" -ge 90 ]; then bar_color="$red"
|
||
elif [ "$pct" -ge 70 ]; then bar_color="$yellow"
|
||
elif [ "$pct" -ge 50 ]; then bar_color="$orange"
|
||
else bar_color="$green"
|
||
fi
|
||
local f="" e=""
|
||
for ((i=0; i<filled; i++)); do f+="█"; done
|
||
for ((i=0; i<empty; i++)); do e+="░"; done
|
||
printf "${bar_color}${f}${dim}${e}${reset}"
|
||
}
|
||
|
||
# ===== Git info with per-directory caching =====
|
||
get_git_info() {
|
||
local dir="$1"
|
||
[ -z "$dir" ] && return
|
||
|
||
# Stable cache key per directory path
|
||
local dir_hash
|
||
dir_hash=$(printf '%s' "$dir" | cksum | awk '{print $1}')
|
||
local cache_file="$CACHE_DIR/git-${dir_hash}"
|
||
|
||
local needs_refresh=true
|
||
if [ -f "$cache_file" ]; then
|
||
local mtime now age
|
||
mtime=$(stat -f %m "$cache_file" 2>/dev/null || stat -c %Y "$cache_file" 2>/dev/null)
|
||
now=$(date +%s)
|
||
age=$(( now - mtime ))
|
||
[ "$age" -lt "$GIT_CACHE_SECS" ] && needs_refresh=false
|
||
fi
|
||
|
||
if $needs_refresh; then
|
||
# Branch name (or short hash for detached HEAD)
|
||
local branch
|
||
branch=$(git -C "$dir" symbolic-ref --short HEAD 2>/dev/null)
|
||
if [ -z "$branch" ]; then
|
||
branch=$(git -C "$dir" rev-parse --short HEAD 2>/dev/null)
|
||
if [ -z "$branch" ]; then
|
||
: > "$cache_file" # not a git repo — write empty cache
|
||
return
|
||
fi
|
||
branch="(${branch})"
|
||
fi
|
||
|
||
# Dirty: any staged or unstaged changes
|
||
local dirty=""
|
||
[ -n "$(git -C "$dir" status --porcelain 2>/dev/null)" ] && dirty="dirty"
|
||
|
||
# Ahead / behind upstream (skip if no upstream set)
|
||
local ahead=0 behind=0
|
||
local upstream
|
||
upstream=$(git -C "$dir" rev-parse --abbrev-ref "@{upstream}" 2>/dev/null)
|
||
if [ -n "$upstream" ]; then
|
||
local ab
|
||
ab=$(git -C "$dir" rev-list --left-right --count "HEAD...${upstream}" 2>/dev/null)
|
||
ahead=$(echo "$ab" | awk '{print $1}')
|
||
behind=$(echo "$ab" | awk '{print $2}')
|
||
fi
|
||
|
||
# Tab-delimited cache (branch names can't contain tabs per git spec)
|
||
printf '%s\t%s\t%s\t%s' "$branch" "$dirty" "${ahead:-0}" "${behind:-0}" > "$cache_file"
|
||
fi
|
||
|
||
cat "$cache_file" 2>/dev/null
|
||
}
|
||
|
||
# ===== OAuth token resolution =====
|
||
get_oauth_token() {
|
||
[ -n "$CLAUDE_CODE_OAUTH_TOKEN" ] && echo "$CLAUDE_CODE_OAUTH_TOKEN" && return 0
|
||
|
||
if command -v security >/dev/null 2>&1; then
|
||
local blob token
|
||
blob=$(security find-generic-password -s "Claude Code-credentials" -w 2>/dev/null)
|
||
if [ -n "$blob" ]; then
|
||
token=$(echo "$blob" | jq -r '.claudeAiOauth.accessToken // empty' 2>/dev/null)
|
||
[ -n "$token" ] && [ "$token" != "null" ] && echo "$token" && return 0
|
||
fi
|
||
fi
|
||
|
||
local creds_file="${HOME}/.claude/.credentials.json"
|
||
if [ -f "$creds_file" ]; then
|
||
local token
|
||
token=$(jq -r '.claudeAiOauth.accessToken // empty' "$creds_file" 2>/dev/null)
|
||
[ -n "$token" ] && [ "$token" != "null" ] && echo "$token" && return 0
|
||
fi
|
||
|
||
if command -v secret-tool >/dev/null 2>&1; then
|
||
local blob token
|
||
blob=$(timeout 2 secret-tool lookup service "Claude Code-credentials" 2>/dev/null)
|
||
if [ -n "$blob" ]; then
|
||
token=$(echo "$blob" | jq -r '.claudeAiOauth.accessToken // empty' 2>/dev/null)
|
||
[ -n "$token" ] && [ "$token" != "null" ] && echo "$token" && return 0
|
||
fi
|
||
fi
|
||
|
||
echo ""
|
||
}
|
||
|
||
# ===== ISO 8601 → epoch (cross-platform) =====
|
||
iso_to_epoch() {
|
||
local iso_str="$1"
|
||
local epoch
|
||
|
||
epoch=$(date -d "${iso_str}" +%s 2>/dev/null)
|
||
[ -n "$epoch" ] && echo "$epoch" && return 0
|
||
|
||
local stripped="${iso_str%%.*}"
|
||
stripped="${stripped%%Z}"
|
||
stripped="${stripped%%+*}"
|
||
stripped="${stripped%%-[0-9][0-9]:[0-9][0-9]}"
|
||
|
||
if [[ "$iso_str" == *"Z"* ]] || [[ "$iso_str" == *"+00:00"* ]] || [[ "$iso_str" == *"-00:00"* ]]; then
|
||
epoch=$(env TZ=UTC date -j -f "%Y-%m-%dT%H:%M:%S" "$stripped" +%s 2>/dev/null)
|
||
else
|
||
epoch=$(date -j -f "%Y-%m-%dT%H:%M:%S" "$stripped" +%s 2>/dev/null)
|
||
fi
|
||
|
||
[ -n "$epoch" ] && echo "$epoch" && return 0
|
||
return 1
|
||
}
|
||
|
||
format_reset_time() {
|
||
local iso_str="$1" style="$2"
|
||
[ -z "$iso_str" ] || [ "$iso_str" = "null" ] && return
|
||
local epoch
|
||
epoch=$(iso_to_epoch "$iso_str")
|
||
[ -z "$epoch" ] && return
|
||
case "$style" in
|
||
time)
|
||
date -j -r "$epoch" +"%l:%M%p" 2>/dev/null | sed 's/^ //' | tr '[:upper:]' '[:lower:]' ||
|
||
date -d "@$epoch" +"%l:%M%P" 2>/dev/null | sed 's/^ //'
|
||
;;
|
||
datetime)
|
||
date -j -r "$epoch" +"%b %-d, %l:%M%p" 2>/dev/null | sed 's/ / /g; s/^ //' | tr '[:upper:]' '[:lower:]' ||
|
||
date -d "@$epoch" +"%b %-d, %l:%M%P" 2>/dev/null | sed 's/ / /g; s/^ //'
|
||
;;
|
||
esac
|
||
}
|
||
|
||
# ===== Extract JSON =====
|
||
model_name=$(echo "$input" | jq -r '.model.display_name // "Claude"')
|
||
cwd=$(echo "$input" | jq -r '.cwd // empty')
|
||
cost_usd=$(echo "$input" | jq -r '.cost.total_cost_usd // empty')
|
||
# Formatted here rather than where it is rendered: the wrap-mode branch budget
|
||
# needs its width, and it is not fixed ("$4.61" vs "$1234.56").
|
||
cost_fmt=""
|
||
[ -n "$cost_usd" ] && cost_fmt=$(printf '%.2f' "$cost_usd" 2>/dev/null)
|
||
|
||
size=$(echo "$input" | jq -r '.context_window.context_window_size // 200000')
|
||
[ "$size" -eq 0 ] 2>/dev/null && size=200000
|
||
|
||
input_tokens=$(echo "$input" | jq -r '.context_window.current_usage.input_tokens // 0')
|
||
cache_create=$(echo "$input" | jq -r '.context_window.current_usage.cache_creation_input_tokens // 0')
|
||
cache_read=$(echo "$input" | jq -r '.context_window.current_usage.cache_read_input_tokens // 0')
|
||
current=$(( input_tokens + cache_create + cache_read ))
|
||
|
||
used_tokens=$(format_tokens $current)
|
||
total_tokens=$(format_tokens $size)
|
||
pct_used=$(( size > 0 ? current * 100 / size : 0 ))
|
||
|
||
thinking_on=false
|
||
[ "$sl_thinking" = "true" ] && thinking_on=true
|
||
|
||
# ===== Adaptive width tiers =====
|
||
#
|
||
# Tiers now choose only how much of LINE ONE to show. What the rate-limit
|
||
# group contains, and whether it wraps, is decided by measurement at the end of
|
||
# the script, not here -- tiers cannot see how long the branch, cwd or model
|
||
# name is, which is how content used to end up clipped.
|
||
#
|
||
# full (≥150): CWD, ahead/behind, "◆ thinking", cost
|
||
# wide (100–149): ahead/behind, "◆ thinking", cost
|
||
# split (76–99): short model, ahead/behind, "◆" symbol
|
||
# (reachable only with WRAP_NARROW=false; otherwise the wrap
|
||
# band below overrides this range to wide)
|
||
# narrow (<76): short model + branch + token only; no rate limits at all
|
||
#
|
||
if [ "$USABLE_WIDTH" -ge 150 ] 2>/dev/null; then width_tier="full"
|
||
elif [ "$USABLE_WIDTH" -ge 100 ] 2>/dev/null; then width_tier="wide"
|
||
elif [ "$USABLE_WIDTH" -ge 76 ] 2>/dev/null; then width_tier="split"
|
||
else width_tier="narrow"
|
||
fi
|
||
|
||
# Two-line mode. Between WRAP_FLOOR and WRAP_MIN_WIDTH there isn't room for
|
||
# everything on one line, but there IS room across two — so instead of dropping
|
||
# the rate-limit group we break before it and render the wide-tier content.
|
||
# Below WRAP_FLOOR the narrow tier applies instead, which drops the rate-limit
|
||
# group entirely -- so there is nothing to wrap and no second line to put it on.
|
||
WRAP_FLOOR=68
|
||
wrap_mode=false
|
||
if $WRAP_NARROW \
|
||
&& [ "$USABLE_WIDTH" -lt "$WRAP_MIN_WIDTH" ] 2>/dev/null \
|
||
&& [ "$USABLE_WIDTH" -ge "$WRAP_FLOOR" ] 2>/dev/null; then
|
||
wrap_mode=true
|
||
width_tier="wide"
|
||
fi
|
||
|
||
# Shorten model name for tight spaces
|
||
short_model() {
|
||
case "$1" in
|
||
*Opus*) echo "Opus" ;;
|
||
*Sonnet*) echo "Sonnet" ;;
|
||
*Haiku*) echo "Haiku" ;;
|
||
*) echo "$1" | awk '{print $NF}' ;; # last word
|
||
esac
|
||
}
|
||
|
||
# ===== Build output =====
|
||
# Explicitly empty: bash imports same-named environment variables, and a
|
||
# stray $rl_lean would otherwise leak into the rendered line.
|
||
out=""
|
||
rl_bare=""
|
||
rl_lean=""
|
||
rl_mid=""
|
||
rl_rich=""
|
||
|
||
# Model — color by family
|
||
model_color="$blue"
|
||
case "$model_name" in
|
||
*Opus*) model_color="$amber" ;;
|
||
*Haiku*) model_color="$cyan" ;;
|
||
esac
|
||
|
||
display_model="$model_name"
|
||
# split/narrow: shorten so the 5h + 7d bars still fit on one line.
|
||
# wrap mode too: it renders wide-tier content at a split-tier width, and a long
|
||
# display name ("Opus 5 (1M context)" is 19 cols) would overflow line one.
|
||
if [ "$width_tier" = "split" -o "$width_tier" = "narrow" ] || $wrap_mode; then
|
||
display_model=$(short_model "$model_name")
|
||
fi
|
||
out+="${model_color}$(esc_data "$display_model")${reset}"
|
||
|
||
# CWD — full tier only (branch name gives enough context below that)
|
||
if [ "$width_tier" = "full" ] && [ -n "$cwd" ]; then
|
||
# Capped like the branch name: nothing else shortens line one, so an
|
||
# unusually long project directory would push it past the terminal edge.
|
||
display_dir=$(truncate_str "${cwd##*/}" "$CWD_MAX_LEN")
|
||
out+="${sep}${dim}$(esc_data "$display_dir")${reset}"
|
||
fi
|
||
|
||
bar_w="$TOKEN_BAR_WIDTH"
|
||
[ "$width_tier" = "wide" ] && bar_w=6
|
||
[ "$width_tier" = "split" ] && bar_w=5
|
||
[ "$width_tier" = "narrow" ] && bar_w=4
|
||
|
||
# Git branch + dirty + ahead/behind
|
||
if $SHOW_GIT && [ -n "$cwd" ]; then
|
||
git_info=$(get_git_info "$cwd")
|
||
if [ -n "$git_info" ]; then
|
||
IFS=$'\t' read -r g_branch g_dirty g_ahead g_behind <<< "$git_info"
|
||
|
||
# Progressively tighten branch truncation
|
||
local_max="$BRANCH_MAX_LEN"
|
||
[ "$width_tier" = "wide" ] && local_max=24
|
||
[ "$width_tier" = "split" ] && local_max=18
|
||
[ "$width_tier" = "narrow" ] && local_max=12
|
||
# In wrap mode line one is
|
||
# model │ ⎇ branch ✔ ↑1 │ <bar> used/total pct% │ ◇ thinking │ $cost
|
||
# and the branch gets whatever the rest of it leaves. Everything after
|
||
# the branch is appended below, so its width is added up here rather
|
||
# than assumed: a flat 56 columns was three short of a four-digit cost,
|
||
# which pushed line one past the edge to be clipped by the renderer.
|
||
if $wrap_mode; then
|
||
tail_len=$(( 5 + 2 )) # "│ ⎇ " and the dirty mark
|
||
[ "${g_ahead:-0}" -gt 0 ] && tail_len=$(( tail_len + 2 + ${#g_ahead} ))
|
||
[ "${g_behind:-0}" -gt 0 ] && tail_len=$(( tail_len + 2 + ${#g_behind} ))
|
||
$SHOW_TOKENS && tail_len=$(( tail_len + 3 + bar_w + 1 \
|
||
+ ${#used_tokens} + 1 + ${#total_tokens} + 1 + ${#pct_used} + 1 ))
|
||
$SHOW_THINKING && tail_len=$(( tail_len + 3 + 10 ))
|
||
[ -n "$cost_fmt" ] && tail_len=$(( tail_len + 3 + 1 + ${#cost_fmt} ))
|
||
local_max=$(( USABLE_WIDTH - $(vis_len "$out") - tail_len ))
|
||
[ "$local_max" -lt 8 ] && local_max=8
|
||
[ "$local_max" -gt 24 ] && local_max=24
|
||
fi
|
||
g_branch_display=$(truncate_str "$g_branch" "$local_max")
|
||
|
||
out+="${sep}${dim}⎇${reset} ${magenta}$(esc_data "$g_branch_display")${reset}"
|
||
|
||
if [ "$g_dirty" = "dirty" ]; then
|
||
out+=" ${red}✗${reset}"
|
||
else
|
||
out+=" ${green}✔${reset}"
|
||
fi
|
||
|
||
# Ahead/behind: shown in all tiers except narrow (only if non-zero)
|
||
if [ "$width_tier" != "narrow" ]; then
|
||
[ "${g_ahead:-0}" -gt 0 ] && out+=" ${green}↑${g_ahead}${reset}"
|
||
[ "${g_behind:-0}" -gt 0 ] && out+=" ${orange}↓${g_behind}${reset}"
|
||
fi
|
||
fi
|
||
fi
|
||
|
||
# Token bar
|
||
if $SHOW_TOKENS; then
|
||
token_bar=$(build_bar "$pct_used" "$bar_w")
|
||
out+="${sep}${token_bar} ${orange}${used_tokens}${dim}/${reset}${white}${total_tokens}${reset} ${dim}${pct_used}%${reset}"
|
||
fi
|
||
|
||
# Thinking:
|
||
# full/wide → "◆ thinking" / "◇ thinking" (label)
|
||
# split → "◆" / "◇" (symbol only, saves ~9 chars)
|
||
# narrow → hidden
|
||
if $SHOW_THINKING && [ "$width_tier" != "narrow" ]; then
|
||
out+="${sep}"
|
||
if $thinking_on; then
|
||
if [ "$width_tier" = "split" ]; then out+="${amber}◆${reset}"
|
||
else out+="${amber}◆ thinking${reset}"; fi
|
||
else
|
||
if [ "$width_tier" = "split" ]; then out+="${dim}◇${reset}"
|
||
else out+="${dim}◇ thinking${reset}"; fi
|
||
fi
|
||
fi
|
||
|
||
# Session cost — wide/full only
|
||
if [ -n "$cost_fmt" ] && [ "$width_tier" = "wide" -o "$width_tier" = "full" ]; then
|
||
out+="${sep}${dim}\$${cost_fmt}${reset}"
|
||
fi
|
||
|
||
# ===== Rate limits (API, cached USAGE_CACHE_SECS) =====
|
||
# Built at every tier except narrow. Which variant is actually emitted,
|
||
# and on how many lines, is decided by the measured ladder at the end.
|
||
if $SHOW_RATE_LIMITS && [ "$width_tier" != "narrow" ]; then
|
||
api_cache="$CACHE_DIR/statusline-usage-cache.json"
|
||
fail_marker="$CACHE_DIR/statusline-usage-fail"
|
||
needs_refresh=true
|
||
usage_data=""
|
||
|
||
if [ -f "$api_cache" ]; then
|
||
cache_mtime=$(stat -c %Y "$api_cache" 2>/dev/null || stat -f %m "$api_cache" 2>/dev/null)
|
||
now=$(date +%s)
|
||
cache_age=$(( now - cache_mtime ))
|
||
if [ "$cache_age" -lt "$USAGE_CACHE_SECS" ]; then
|
||
cached_content=$(cat "$api_cache" 2>/dev/null)
|
||
# Only use cache if it's valid data (not an error response)
|
||
if [ -n "$cached_content" ] && ! echo "$cached_content" | jq -e '.error' >/dev/null 2>&1; then
|
||
needs_refresh=false
|
||
usage_data="$cached_content"
|
||
fi
|
||
fi
|
||
fi
|
||
|
||
if $needs_refresh; then
|
||
# Hold off after a failed fetch. With no network curl can burn its
|
||
# --max-time before giving up, and a redraw happens on every keystroke,
|
||
# so retrying each time would stall the whole status line. The marker is
|
||
# separate from the cached response, rather than a touch of it: a cold
|
||
# /tmp has no response to touch, which is exactly when there is also no
|
||
# stale data to fall back on and the timeout is paid in full.
|
||
attempt=true
|
||
if [ -f "$fail_marker" ]; then
|
||
fail_mtime=$(stat -c %Y "$fail_marker" 2>/dev/null || stat -f %m "$fail_marker" 2>/dev/null)
|
||
[ $(( $(date +%s) - fail_mtime )) -lt "$USAGE_RETRY_SECS" ] && attempt=false
|
||
fi
|
||
|
||
if $attempt; then
|
||
token=$(get_oauth_token)
|
||
if [ -n "$token" ] && [ "$token" != "null" ]; then
|
||
# Marked before the call, cleared when it lands. A fetch is in
|
||
# flight for as long as curl takes to time out, and this cache
|
||
# dir is shared by every session, so redraws that start inside
|
||
# that window are real: they now serve stale data instead of
|
||
# each launching their own doomed request. Written on every
|
||
# attempt, so a repeated failure restarts the backoff, and only
|
||
# by an attempt, so the redraws it suppresses cannot keep
|
||
# re-stamping it and it always lapses.
|
||
#
|
||
# No credentials is not a failure worth suppressing: it costs no
|
||
# timeout, and the next redraw after a login should show the
|
||
# bars rather than wait out a retry window. Hence inside the
|
||
# token check.
|
||
: > "$fail_marker"
|
||
response=$(curl -s --max-time 10 \
|
||
-H "Accept: application/json" \
|
||
-H "Content-Type: application/json" \
|
||
-H "Authorization: Bearer $token" \
|
||
-H "anthropic-beta: oauth-2025-04-20" \
|
||
-H "User-Agent: claude-code/2.1.34" \
|
||
"https://api.anthropic.com/api/oauth/usage" 2>/dev/null)
|
||
if [ -n "$response" ] && echo "$response" | jq . >/dev/null 2>&1; then
|
||
# Only cache successful (non-error) responses
|
||
if ! echo "$response" | jq -e '.error' >/dev/null 2>&1; then
|
||
usage_data="$response"
|
||
echo "$response" > "$api_cache"
|
||
rm -f "$fail_marker"
|
||
fi
|
||
fi
|
||
fi
|
||
fi
|
||
|
||
# Fall back to stale cache if refresh failed — skip if it's an error response
|
||
if [ -z "$usage_data" ] && [ -f "$api_cache" ]; then
|
||
stale=$(cat "$api_cache" 2>/dev/null)
|
||
! echo "$stale" | jq -e '.error' >/dev/null 2>&1 && usage_data="$stale"
|
||
fi
|
||
fi
|
||
|
||
if [ -n "$usage_data" ] && echo "$usage_data" | jq -e . >/dev/null 2>&1; then
|
||
bar_width=6
|
||
[ "$width_tier" = "split" ] && bar_width=4
|
||
|
||
# One jq pass for the whole payload. Parsing it field by field meant
|
||
# ~10 jq processes per render on the same JSON; the status line runs on
|
||
# every redraw, so that was the dominant cost. Rounding happens in jq
|
||
# too, which removes the per-field awk calls.
|
||
#
|
||
# The per-model weekly limit (e.g. Fable) lives in .limits[] under kind
|
||
# "weekly_scoped" -- the legacy seven_day_opus / seven_day_sonnet fields
|
||
# are always null now. Prefer an is_active entry, else take the first.
|
||
# `.limits[]?` tolerates limits being absent or not an array, and
|
||
# `tonumber? // 0` tolerates a percentage arriving as a string.
|
||
# One field per line, not @tsv: tab is IFS whitespace, so `read` collapses
|
||
# runs of it and an empty field (no scoped limit -> empty display name)
|
||
# would silently shift every later field along by one.
|
||
{
|
||
IFS= read -r five_hour_pct
|
||
IFS= read -r seven_day_pct
|
||
IFS= read -r five_hour_reset_iso
|
||
IFS= read -r seven_day_reset_iso
|
||
IFS= read -r scoped_name
|
||
IFS= read -r scoped_pct
|
||
IFS= read -r extra_enabled
|
||
IFS= read -r extra_pct
|
||
IFS= read -r extra_used
|
||
IFS= read -r extra_limit
|
||
} <<EOF
|
||
$(echo "$usage_data" | jq -r '
|
||
def num: (tonumber? // 0);
|
||
([.limits[]? | select(.kind == "weekly_scoped")]
|
||
| (map(select(.is_active)) + .) | first) as $scoped
|
||
| [ (.five_hour.utilization | num | round),
|
||
(.seven_day.utilization | num | round),
|
||
(.five_hour.resets_at // ""),
|
||
(.seven_day.resets_at // ""),
|
||
(($scoped.scope.model.display_name // "") | gsub("[\\n\\r\\t]"; " ")),
|
||
($scoped.percent | num | round),
|
||
(.extra_usage.is_enabled // false),
|
||
(.extra_usage.utilization | num | round),
|
||
((.extra_usage.used_credits | num) / 100 * 100 | round / 100),
|
||
((.extra_usage.monthly_limit | num) / 100 * 100 | round / 100)
|
||
] | .[] | tostring' 2>/dev/null)
|
||
EOF
|
||
|
||
# Three variants of the rate-limit group, richest first:
|
||
# rl_rich bars + reset times + extra usage
|
||
# rl_mid bars + extra usage
|
||
# rl_lean bars only
|
||
# The ladder at the end emits the richest one that fits the space it
|
||
# has. Keeping a lean variant matters: extra-usage credits add ~30
|
||
# columns, which can overflow line two on its own.
|
||
seg_5h="${dim}5h${reset} $(build_bar "${five_hour_pct:-0}" "$bar_width") ${cyan}${five_hour_pct:-0}%${reset}"
|
||
seg_7d="${sep}${dim}7d${reset} $(build_bar "${seven_day_pct:-0}" "$bar_width") ${cyan}${seven_day_pct:-0}%${reset}"
|
||
|
||
# Rendered inside the 7d segment rather than as its own: both are weekly
|
||
# limits resetting at the same time, so one shared reset label covers
|
||
# the pair and saves a separator plus a second timestamp.
|
||
seg_scoped=""
|
||
if $SHOW_MODEL_LIMIT && [ -n "$scoped_name" ]; then
|
||
seg_scoped=" ${dim}$(esc_data "$(truncate_str "$scoped_name" 8)")${reset} $(build_bar "${scoped_pct:-0}" "$bar_width") ${cyan}${scoped_pct:-0}%${reset}"
|
||
fi
|
||
|
||
# Extra usage, when the account has it enabled.
|
||
seg_extra=""
|
||
if [ "$extra_enabled" = "true" ]; then
|
||
seg_extra="${sep}${dim}extra${reset} $(build_bar "${extra_pct:-0}" "$bar_width") ${cyan}\$$(printf '%.2f' "${extra_used:-0}")${dim}/\$$(printf '%.2f' "${extra_limit:-0}")${reset}"
|
||
fi
|
||
|
||
# rl_bare drops the per-model bar too: the last thing worth giving up,
|
||
# and the only way to fit at all when wrapping is disabled and the
|
||
# terminal is narrow.
|
||
rl_bare="${seg_5h}${seg_7d}"
|
||
rl_lean="${rl_bare}${seg_scoped}"
|
||
rl_mid="${rl_lean}${seg_extra}"
|
||
rl_rich="$rl_mid"
|
||
|
||
# Formatting the two reset timestamps costs ~10 subprocesses (date has
|
||
# no portable one-shot form here), so only pay for it when there is a
|
||
# chance they will be shown: appended to line one, or alone on line two.
|
||
# RESET_COST is the combined width of " reset 4:40p.m." and
|
||
# " reset aug 28, 3:00a.m.".
|
||
line1_len=$(vis_len "$out")
|
||
mid_len=$(vis_len "$rl_mid")
|
||
RESET_COST=30
|
||
if [ $(( line1_len + 3 + mid_len + RESET_COST )) -le "$USABLE_WIDTH" ] \
|
||
|| { $WRAP_NARROW && [ $(( mid_len + RESET_COST )) -le "$USABLE_WIDTH" ]; }; then
|
||
five_hour_reset=$(format_reset_time "$five_hour_reset_iso" "time")
|
||
seven_day_reset=$(format_reset_time "$seven_day_reset_iso" "datetime")
|
||
r5=""; [ -n "$five_hour_reset" ] && r5=" ${dim}↺ ${five_hour_reset}${reset}"
|
||
r7=""; [ -n "$seven_day_reset" ] && r7=" ${dim}↺ ${seven_day_reset}${reset}"
|
||
rl_rich="${seg_5h}${r5}${seg_7d}${seg_scoped}${r7}${seg_extra}"
|
||
fi
|
||
fi
|
||
fi
|
||
|
||
# Attach the rate-limit group, emitting the richest layout that fits.
|
||
#
|
||
# A second line is worth it for the per-model bar and nothing else: rl_bare is
|
||
# the only variant that drops that bar, and it is the whole reason the group is
|
||
# worth showing on an account that has one. Reset times and extra-usage credits
|
||
# are given up instead of wrapped for, so content is NOT monotone in width -- at
|
||
# one column narrower, rung 3 stops fitting and the wrap that follows has room
|
||
# for the timestamps as well. Only wrapping being switched off makes rl_bare the
|
||
# answer.
|
||
# 1-3. one line: with resets / with extra usage / bars + per-model
|
||
# 4-6. two lines: same order, line two having room the single line lacked
|
||
# 7. one line, bars only -- WRAP_NARROW=false, the least-bad single line
|
||
# Every branch is fit-checked, so no layout is chosen that would be clipped by
|
||
# the renderer, whatever the branch name, cwd, model name or extra-usage width.
|
||
if [ -n "$rl_bare" ]; then
|
||
rich_len=$(vis_len "$rl_rich")
|
||
lean_len=$(vis_len "$rl_lean")
|
||
if [ $(( line1_len + 3 + rich_len )) -le "$USABLE_WIDTH" ]; then out+="${sep}${rl_rich}"
|
||
elif [ $(( line1_len + 3 + mid_len )) -le "$USABLE_WIDTH" ]; then out+="${sep}${rl_mid}"
|
||
elif [ $(( line1_len + 3 + lean_len )) -le "$USABLE_WIDTH" ]; then out+="${sep}${rl_lean}"
|
||
elif $WRAP_NARROW; then
|
||
if [ "$rich_len" -le "$USABLE_WIDTH" ]; then out+=$'\n'"$rl_rich"
|
||
elif [ "$mid_len" -le "$USABLE_WIDTH" ]; then out+=$'\n'"$rl_mid"
|
||
elif [ "$lean_len" -le "$USABLE_WIDTH" ]; then out+=$'\n'"$rl_lean"
|
||
else out+=$'\n'"$rl_bare"
|
||
fi
|
||
else
|
||
out+="${sep}${rl_bare}"
|
||
fi
|
||
fi
|
||
|
||
printf "%b" "$out"
|
||
exit 0
|